Alloy Steel Products

Range : ½” NB TO 24” NB IN SCH 20 , 30, STD, 40 , 60 , 80 , XS , 100 , 120 , 140 , 160 & XXS as Per NACE MR 01 75

Type : SEAMLESS / FABRICATED

length : Single Random, Double Random & Cut Length

End : Plain End, Bevelled End, Threaded

Alloy Steel Pipe
Standard : ASTM / ASME A 335
Grade : Gr P 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91

Value Added Sevices

• Bending
• Draw & Expansion
• Customized Pipe

Test Certificate
Mill Test Certificate as per EN 10204 / 3.1

Grade : F5/F9/F11/F12/F22/F91

Alloy Steel Bar

Range: 5 mm to 300 mm Dia in 4000 mm to 6000 mm Length

Finish

• Bright
• Black

Form: Round

Test Certificate : Mill Test Certificate as per EN 10204 / 3.1

Size - 1/2" to 36"
Schedule - Sch. 5 to Sch XXS
Duplex steel - ASTM A335 Gr. P5, P9, P11, P12, P22 & P91

Range: 6.35 mm OD up to 254 mm OD in 0.6 TO 20 mm thickness.

Other

• Hydraulic Tube
• Horn Tube
• Capillary Tube
• Boiler Tube
• Precision Tube
• IBR Tube

Length

• Single Random, Double Random & Required Length

End

• Plain End, Bevelled End, Treaded

Alloy Steel Tubes

Standard : ASTM / ASME A/SA 213

Grade: T9, T11, T12, T22, T91

Test Certificate
Mill Test Certificate as per EN 10204 / 3.1

Alloy Steel Buttweld Fittings

Range : 1/2"NB TO 48"NB IN SCH: 20, 30, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type : seamless / welded/ fabricated

Form

• Elbows in Long & Short Radius in 45 deg, 90 deg, 180 deg.
• Equal, Unequal Tee & Barred Tee.
• Eccentric Reducer & Concentric Reducer.
• Caps & Crosses.
• Long & Short Stub End.
• Swage Nipple & Barrel Nipple.

Alloy Steel Long Radius Bend
Long Radius Bend, Piggable Bend, Hot Bend with Radius R=3D, 5D, 6D, 8D, 10D & 20D.
Minimum wall thinning rate and ovality No wrinkles

Alloy Steel Forged Fittings
¼” NB to 4” NB in 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75.

Type
Socket Weld (S/W) & Screwed (SCRD)

Form
Elbow 45 deg & 90 degree, Tee , Union, Full & Half coupling, Cross, Cap, Swage Nipple, Plug, Bush

Alloy Steel Buttweld Fittings

• Standard : ASTM / ASME A/SA 234
• Grade : WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91.
• Alloy Steel Forged Fittings
• Standard : ASTM A182
• Grade : F1/F5/F9/F11/F22/F91

Other Fittings

• Customised Fittings
• Hydraulic Fittings
• Instrumentation Fittings

Value Added Services

• Hot Dipped Galvanizing
• Sand Blasting

Test Certificate
Manufacturer Test Certificate as per EN 10204 / 3.1

We offer a wide range of Alloy 20 Weld Neck Flanges of special grade. The Flanges have special anatomy that make them indispensable in large and small machineries. These Alloy 20 Weld Neck Flanges have small pit holes at their circumference which ensure proper, safe and easy installation and removal.

Grade: Alloy 20 UNS N0.8020

We offer a wide range of Alloy Steel End Cap that are used to blind the pipeline. They help to stop the flow from one end in a pipeline. We supply ready to install end caps in different dimensions specifications to meet the requirements of the clients. This High corrosion Nickel Alloy Material is used in Oil & Gas, Heat Exchangers, Aerospace, Pharmaceutical, Defense.

Alloy Steel End Cap is Durability, rust and heat resistance is some of the features which make these products high in demand. Furthermore, they are used in industries like energy industry, paper mills, textile industry, chemical industry, dairy plant, machinery fabrications, oil and gas industry, ships industry and other associated industries.

Materials:

Alloy steel CAP- AS Cap

Alloy Steel Laterals

• Range : 1/2"NB TO 48"NB IN SCH: 20, 30, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Alloy Steel Concentric Reducer

Range :

• 1/8"nb to 48"nb in sch: 5s, 10s, 40s, 80s, 10, 20, 40, std, 60, 80, xs, 100, 120, 140, 160, xxs available with nace mr 01-75

Form :

• Equal tee
• Reducing tee
• Cross tee
• Lateral tee

Type : seamless / welded/ fabricated
Alloy steel:

• Astm / asme a/sa 234 gr. Wp 1, wp 5, wp 9, wp 11, wp 12, wp 22, wp 91

Our expertise has enabled us to come with an excellent collection of 180Degree Bends . The offered U bends are widely used in the petrochemical and oil industries. Moreover, clients can avail these bends in different sizes and specifications as per their needs. We offer these bends to the customers at market-leading prices to suit their requirements.

• Standard : ANSI/ASME, MSS, JIS, DIN, BS etc.
• Size : 1/8"NB TO 12"NB IN
• Alloy Steel Long Radius Bends
• ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91

We are an unmatched name, engaged in manufacturing, exporting and supplying a wide assortment of Alloy Steel Equal Tee. This tee is efficiently manufactured by utilizing superior grade stainless steel with the help of latest techniques in conformity with set industry standards. As the name intends, this tee is extensively used for pipe fitting applications in various industries. Furthermore, we provide this Alloy Steel Equal Teein diverse dimensions and at industry leading prices.

Features:

• Corrosion resistance

• Flawless finish

• High endurance

• Dimensional accuracy

Range :

• 1/8"nb to 48"nb in sch: 5s, 10s, 40s, 80s, 10, 20, 40, std, 60, 80, xs, 100, 120, 140, 160, xxs available with nace mr 01-75

Form :

• Equal tee

• Reducing tee

• Cross tee

• Lateral tee

Type : seamless / welded/ fabricated

Alloy steel:

• Astm / asme a/sa 234 gr. Wp 1, wp 5, wp 9, wp 11, wp 12, wp 22, wp 91

We have established ourselves as a prominent manufacturer and exporter of Pipe Elbows and Pipe Elbow Fittings.. The elbow offered by us are widely used for connecting two pipes or tubes, allowing a change of direction. Customers can avail short and long radius elbows from us. Moreover, the offered products are widely appreciated in the market for their features like resistance against corrosion & abrasion, seamless finishing and dimensional stability.

Standard : ANSI/ASME, MSS, JIS, DIN, BS etc

Size
1/2"NB TO 48"NB IN

Schedule
SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS

Type
Seamless / ERW / Welded / Fabricated

Form
45 Deg Elbow, 90 Deg Elbow, 180 Deg Elbow, Short Radius, Long Radius, Any required deg.
Alloy Steel 90 Degree Elbow
Standard : ASTM / ASME A/SA 234
Grade : WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 23, WP 91.

• Item Code: 00032
• Production Capacity: 10 TOn
• Delivery Time: As per client requirement
• Packaging Details: Wooden Box

Alloy Steel Buttweld Fittings

Range : 1/2"NB TO 48"NB IN SCH: 20, 30, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75

Type : SEAMLESS / WELDED/ FABRICATED

Form

• Elbows in Long & Short Radius in 45 deg, 90 deg, 180 deg.
• Equal, Unequal Tee & Barred Tee.
• Eccentric Reducer & Concentric Reducer.
• Caps & Crosses.
• Long & Short Stub End.
• Swage Nipple & Barrel Nipple.

Alloy Steel Long Radius Bend
Long Radius Bend, Piggable Bend, Hot Bend with Radius R=3D, 5D, 6D, 8D, 10D & 20D.
Minimum wall thinning rate and ovality No wrinkles

Alloy Steel Forged Fittings
¼” NB to 4” NB in 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75.

Type
Socket Weld (S/W) & Screwed (SCRD)

Form
Elbow 45 deg & 90 degree, Tee , Union, Full & Half coupling, Cross, Cap, Swage Nipple, Plug, Bush

Alloy Steel Buttweld Fittings
Standard : ASTM / ASME A/SA 234
Grade : WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 23, WP 91.
Alloy Steel Forged Fittings
Standard : ASTM A182
Grade : F1/F5/F9/F11/F22/F91

Other Fittings

• Customised Fittings
• Hydraulic Fittings
• Instrumentation Fittings

Test Certificate
Manufacturer Test Certificate as per EN 10204 / 3.1

Range : ½” NB to 60” NB

Standard :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
ASA 150#, ASA 300# DIN ND 6,10,16,25,40 Etc.

Nace : NACE MR 01-75, MR 01 03

Type of Flanges :

• Weld Neck Flanges – WNRF
• Socket Weld Flanges - SWRF
• Slip On Raise Face - SORF
• Blind Raise Face – BLRF
• Lap Joint
• Screwed ( Threaded )
• Long Weld Neck
• Reducing
• Spectacle Blind
• Ring Joint
• Large Dia Ring
• Orifice
• Girth Flange

Alloy Steel Flanges
Standard: ASTM / ASME A/SA 182 & A 387
Grade : F1, F5, F9, F11, F12, F22, F91.

SPECIFICATIONS AS PER THE INTERNATIONAL STANDARD ASTM, ASME, API, AISI, BS, ANSI, DIN, JIS, MSSP, NACE

Test Certificate
Manufacturer Test Certificate as per EN 10204 / 3.1

Backed by technically sophisticated production unit, we have been able to offer a qualitative array of Alloy Steel Nipple to the clients. In order to manufacture this nipple in line with set industry norms,our deft professionals make use of excellent quality ally steel and cast iron with the aid of modern machinery. Used as an extension to any pipe assembly, offered nipple is used at constructions sites and numerous industries. In addition, this Alloy Steel Nipplecan be assembled and disassembled easily.

Features:

• Easy to install

• Robust design

• Corrosion resistance

• Light weight

Size : 1/8"NB TO 4"NB IN

Schedule : SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS

Type : Seamless / ERW / Welded

Form : Pipe Nipple, Hex Nipple, Swage Nipple, Barrel Nipple

Alloy Steel Pipe Nipple – AS Pipe Nipple

ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91

Test Certificate

Mill Test Certificate as per EN 10204 / 3.1

We are a eminent manufacturer, exporter and supplier of a broad assortment of Alloy Steel Pipe Fittings. These fittings are efficiently manufactured using optimal grade alloy steel under the strict supervision of our adroit technical experts in conformity with set industry standards. Offered flanges are used for liquid outlet from filter press in varied industry circles. Further, these Alloy Steel Tube Fittings are available in I-beam and T-beam and at economical rates to the clients. 

Features:

• Smooth edges
• High endurance
• Corrosion resistance
• Precise dimension

Specifications:

 

• Material: Plastic delrin

• Bearing: 1/2"BSP or NPT

• Size: 1/2"full circle

• Trajectory Angle: 25° &25°

• Sprinkler Type: Plastic impact sprayer

• OEM Accepted: Yes

• MOQ: 1000pcs

• Packing Details: 75pcs/ctn, ctn

• Size:48.5×25.5×13.5cm, G.W.:4.30Kgs

Alloy Steel Unequal Tee

Range :

• 1/8"nb to 48"nb in sch: 5s, 10s, 40s, 80s, 10, 20, 40, std, 60, 80, xs, 100, 120, 140, 160, xxs available with nace mr 01-75

Form :

• Equal tee
• Reducing tee
• Cross tee
• Lateral tee

Type : seamless / welded/ fabricated
Alloy steel:

• Astm / asme a/sa 234 gr. Wp 1, wp 5, wp 9, wp 11, wp 12, wp 22, wp 91

Range :

• 1/8"nb to 48"nb in sch: 5s, 10s, 40s, 80s, 10, 20, 40, std, 60, 80, xs, 100, 120, 140, 160, xxs available with nace mr 01-75

Type :

• seamless / welded/ fabricated

Form :

• long stubend, short stubend

Alloy steel :

• Astm / asme a/sa 234 gr. Wp 1, wp 5, wp 9, wp 11, wp 12, wp 22, wp 91

Product Details :

Size : 1/2" NB to 48” NB, ANSI B16.5
Schedule : 150#, 300#, 600#, 900#, 1500#, 2500# in ASA 150 & ASA 300
Alloy steel : ASTMA 182 - F5, F9, F11, F12, F22 & F91

Range : 1/2"NB TO 48"NB IN SCH: 20, 30, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 

Type : SEAMLESS / WELDED/ FABRICATED 

Form 

• Elbows in Long & Short Radius in 45 deg, 90 deg, 180 deg.
• Equal, Unequal Tee & Barred Tee.
• Eccentric Reducer & Concentric Reducer.
• Caps & Crosses.
• Long & Short Stub End.
• Swage Nipple & Barrel Nipple.

Alloy Steel Long Radius Bend
Long Radius Bend, Piggable Bend, Hot Bend  with Radius R=3D, 5D, 6D, 8D, 10D & 20D. 
Minimum wall thinning rate and ovality No wrinkles

Alloy Steel Forged Fittings
¼” NB to 4” NB in 3000 LBS, 6000 LBS, 9000 LBS available with NACE MR 01-75. 

Type
Socket Weld (S/W) & Screwed (SCRD)

Form
Elbow 45 deg & 90 degree, Tee , Union, Full & Half coupling, Cross, Cap, Swage Nipple, Plug, Bush 

Alloy Steel Buttweld Fittings
Standard : ASTM / ASME A/SA 234
Grade : WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 23, WP 91.
Alloy Steel Forged Fittings
Standard : ASTM A182
Grade : F1/F5/F9/F11/F22/F91

Other Fittings

• Customised Fittings
• Hydraulic Fittings
• Instrumentation Fittings

Test Certificate
Manufacturer Test Certificate as per EN 10204 / 3.1

Range : 5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length

Type : Sheet, Plates, Flat, Strips, Profile, Blank ,Circle, Ring etc.

Alloy Steel Plate
Standard : ASTM / ASME A/SA 387
Grade : F 11, F 12, F 22, F 91.

Test Certificate
Mill Test Certificate as per EN 10204 / 3.1

Range : 5 mm To 200 mm thick in 1000 mm TO 2500 mm width & 2500 mm to 12500 mm Length

Type : Sheet, Plates, Flat, Strips, Profile, Blank ,Circle, Ring etc.

Alloy Steel Plate
Standard : ASTM / ASME A/SA 387
Grade : F 11, F 12, F 22, F 91.

Value Added Services

• Cutting
• Bending
• Forging
• Rolling
• Heat Treatment
• Minor Fabrication

Test Certificate
Mill Test Certificate as per EN 10204 / 3.1B

Size - 6” NB to 60” NB
Thickness - Sch.10S/40S/80S/160/XXS
Dimension - ANSI B 16.9:2007, MSS-SP-43, MSS-SP-75
Type - Elbow, Tee, Reducer, Stubend, laterals, Customized Fittings.
Alloy Steel - ASTM A 234 WPW, WP5, WP9, WP11, WP12, WP91

Alloy Steel Eccentric Reducer

Range :

• 1/8"nb to 48"nb in sch: 5s, 10s, 40s, 80s, 10, 20, 40, std, 60, 80, xs, 100, 120, 140, 160, xxs available with nace mr 01-75

Form :

• Equal tee
• Reducing tee
• Cross tee
• Lateral tee

Type : seamless / welded/ fabricated
Alloy steel:

• Astm / asme a/sa 234 gr. Wp 1, wp 5, wp 9, wp 11, wp 12, wp 22, wp 91

We are exporting in Bahrain, Brazil, Canada, Chile, Czech Republic, Egypt, Indonesia, Italy,Oman, Paland, Qatar, Saudi Arabia, Singapore, Uae, Uk, Usa, Germany.